sealyourpavement

Why Should You Seal Your Pavement? 3 Potential Damages

Why seal your pavement?

Sealcoating benefits your concrete against three main causes of damage:

Sun Damage

Roads are subject to increases in temperature, due to natural and artificial heat during convocation with the surface. The surface layer of asphalt can reach a calefaction of 172 degrees Fahrenheit. This reaction with the material melts down the top layer which can result in sinking, potholes and cracks.

Sealcoating aids in the maintenance the integrity and strength of your asphalt. When you decide to sealcoat, you are adding a layer of sealant to the surface layer which acts as a protective solvent much like sunscreen does to our skin. Even more so the same, sealcoat will extend its longevity and slow down its aging process, that would result through its reduction.

Liquid/Moisture Damage

Pavement is extensively affected by natural elements of moisture (like rain and snow) leading to cracks, potholes and its base layer’s degradation. An accumulation of liquid pools seep into the pavement resulting in depression of the surface layer.

Sealcoat helps eliminate these issues and proactively prevent future ones from occurring. Potholes, sinking and alligator cracks can be avoided as a result of the application’s properties working against oxidation, chemicals and water penetration. In addition, this process will fortify the primary layer’s strength and durability against moisture.

Traffic Damage

Not usually thought an impairment, the travel of vehicles often leaves the mass beneath them affected. Larger traffic loads, oversized vehicles, including garbage and delivery trucks’, and tire tracks summate pressure on the pavement. Over time, this layer begins to oxidize and lead to cracks and decay in the road.

The wear and tear of natural and manmade elements greatly can affect the surface of the material. You can think of sealcoat as a barrier against these elements and also an abettor against friction, rust and skid. This process will greatly extend the life of your asphalt and  leave it with a clean, fresh appearance.

An average lifespan of pavement will include several seal coats. Sealcoating is applied either by squeegee or spray to the surface of the pavement slowing down the reduction process. It also protect the top layer from the above common elements of damage and even, color fading or decomposition. It is important to consider this service every 3-5 years to lengthen the lifespan of your pavement. Need help getting started?

At Atlas Construction, we understand the importance of reliable, fast services for asphalt repair and maintenance. We recognize that a variety of circumstances call for our expertise. Whether you’re looking to lay, maintain or repair your asphalt, you can trust Atlas to be able and ready to offer quality, reliable service.

Worried about cost?

At Atlas Construction, we can help you reduce your costs and get the most out of your blacktop or asphalt repair. Our experienced team can help you access your project and give you multiple option for repair and restoration. Atlas Construction has the tools and expertise to ensure a superior paving project regardless of the scope.

Learn more about our concrete and asphalt services.

Protect and prolong with us! Contact us now by filling out this form.

pavementmaintenance

Pavement Maintenance: To Maintain or Not To Maintain

To maintain your pavement or not to maintain and as the line finishes, “that is the question?”

At times, it may be difficult to find an assured answer to this question, especially if you are not familiar with all aspects behind concrete maintenance.

As the property manager of your commercial or residential property, though, you are concerned with the the longitude of your concrete, from intentional and unintentional damage. Some of these induced elements include but are not limited to:

  • Oxygen
  • UV Heat
  • Wind
  • Rain
  • Snow
  • Traffic

Though the average lifespan of your concrete and asphalt project can be anywhere from 20 to 30 years, the maintenance during this time is critical in preventative action against damage. These should take place intermittently every three to five years.

These are some main maintenance options you should consider during those periods of time:

Sealcoating the surface.

An average lifespan of pavement will include several seal coats. Sealcoating is applied either by squeegee or spray to the surface of the pavement slowing down the reduction process. It also protect the top layer from the above common elements of damage and even, color fading or decomposition.

Repairing cracks and fissures.

Cracks, whether great or minor, will spread and lead to further cracks or holes. While still isolated, it’s good to address these, while resources for repair are manageable. Crack fills the asphalt with moisture induced from natural elements and traffic. It affects the base layer and when it freezes, the damage expands. We offer an assessment for your concrete that can detect early sights needed of repair on cracks and alligator cracks. Our specially formulated material for fill reduces spread or further damage.

Replacing concrete.

Asphalt is classified by its chemical composition and physical properties. Our asphalt’s physical components contribute to its effectiveness.

Our process for replacing concrete sets us apart from other construction companies. Our Thermo-Lay hot asphalt paving truck allows us to quickly perform asphalt repair. This highly modern, efficient equipment allows us to do all our asphalt repair with one truck and two people. It’s the fastest and most efficient method available utilizing less labor and resources.

In addition, it allows us to keep asphalt at an even temperature and ready to use for a longer duration. This process is quicker and faster to complete the job than any other common methods used which require more equipment and resources. With us, you receive a superior service for less.

A Long-Term Plan for your Needs

At Atlas Construction, we provide you the best services fitting your project needs, with steady delivery and at a reasonable cost.

Atlas Construction has been operating in Denver, Colorado since 2010 and has gained the reputation as the best choice for all your asphalt, concrete and residential repair needs.

These are more common problem Atlas can assess for you:

  • Surface cracks
  • Grooves, fissures and rusting
  • Sinking or compaction
  • Potholes
  • Patches needed
  • Aggregate
  • Streaks and Fading
  • Uneven surfaces

Still not sure if you need maintenance? We can help you determine this and assess your property whether it be commercial or residential to give you the best option possible for your pavements’ needs.

Atlas Construction is your best choice for asphalt, concrete, and residential repairs in Denver. We also offer a free estimate!

Ensure your pavement maintenance plan with us. Today. Call 303.590.4555.

 

atlasthreesolutionsforasphalt

An Atlas Solution for Your Commercial Asphalt

It’s that season again, where the colder months are starting to retreat and the warmer months are coming into view. With improving weather and road conditions, now’s the time to start planning to complete your commercial asphalt projects.  At Atlas, we are ready to help you get your project assessed, estimated and scheduled for the coming months. Which Atlas solution is right for your business?

Solution #1: Sealcoat 

One way to determine yourself what attention your asphalt requires is to consider its surface’s condition. Is the original black color beginning to fade and is the top layer cracking or sinking inward? If so, you may need to sealcoat.
During this process, we apply sealant as another layer of protection to your asphalt. This protects the surface from further damage and also, from natural deterrents including water, oil left on the road and UV heat. The wear and tear of natural and manmade elements greatly can affect the surface of the material. You can think of sealcoat as a barrier against these elements and also an abettor against friction, rust and skid. This process can also greatly extend the life of your asphalt.

Solution #2: Crack Fill

Another solution is filling of cracks in your existing asphalt. During our assessment of your project, we can identify large problem areas, smaller ones such as alligator cracks* and potential areas of cracking. We’ll then fill these with flexible material designed to prevent further diffusion and strengthens the base layer from supplementary damage. You can look at this as a way to preserve your asphalt and save you future expensive maintenance and repair costs.

Solution #3: Striping

You can also consider striping of your asphalt. Especially if your commercial property includes high traffic areas of vehicles and pedestrians, you’d want to consider this option. At Atlas Construction services, we offer a range of customized markings. Do you need to restripe lines in your car lot? Create additional parking spaces? Direct traffic? Add safety precautions? Become ADA compliant? We can assist you with each of these needs.

So, you realize you do need to get going on your commercial project. We recognize that a variety of circumstances call for our expertise. Whether you’re looking to lay, maintain or repair your asphalt, you can trust Atlas to be able and ready to offer quality, reliable service.

Don’t hesitate, we are waiting to hear from you! Get in contact with us.

sales@atlasconstruction.build or call 303.330.8322.

*How to repair Alligator Cracks

Asphalt has to be resistant enough so that it will not distort or displace over time with heavy traffic loads and changes in temperature. Alligator cracks are often caused by the burdens put upon the underlying layers of your asphalt. Here’s the process we follow to alleviate damage and restore your concrete:

  1. Inspect the source. We check the surrounding areas and assess the extension of existing cracks.
  2. Appraise the sub-base layers of asphalt to evaluate the scope of damage.
  3. Extract damaged sections of the sub-base layers and replace with fresh asphalt.
  4. Reconstruct the surface. A new surface can extend the durability and life of your asphalt and assure no more alligator cracking. This step is usually considered if the previous extraction processes would no longer be the most cost-effective.